Deals 💯 1051 Black Tubeless Presta Valves, 44mm – Premium No Leak Bicycle Valves With Integrated Valve Core Removal Tool 💯

8 reviews for Deals 💯 1051 Black Tubeless Presta Valves, 44mm – Premium No Leak Bicycle Valves With Integrated Valve Core Removal Tool 💯

1. 

   Rated 5 out of 5

   Carl R. Young – December 27, 2021

   Muc off makes a great tubeless presta valvePros Pack of two valves with replacement sealsComes with cap that can take off valve to fill your tire without taking the tire offColors look great, easy to see the valve on your tireTight seal, well constructedCons: Price is slightly higher than most tubeless volves

2. 

   Rated 5 out of 5

   Jose I. Rodriguez-cruz – January 25, 2022

   I’m a man who’ll gladly pay a premium for a product, as long as it solves my problem. My problem in this case was my very first successful tubeless tire installation. The wheels on my new Specialized Roubaix came tubeless ready and with valves that of course didn’t work. They just wouldn’t hold air around the seal. So I stumbled upon these, and since I would have them in my hands inside of 3 days, I bought them, despite how pricey they are.Now, once you see the package, you notice that these valves come with the tool for removing the valve core, which is a plus for me because I love new tools. They also came with 3 different types of valve seals for the hole where the valve pokes out of. All you have to do to swap them is remove the one that came installed from the factory by first removing the cap, lock ring, and the o-ring, which frees up the seal to be removed. Since my DT Swiss wheels wouldn’t work with a cone shaped seal, I used the one that’ll resemble Thor’s hammer when installed. You push that through the hole, make a good tight seal, and despite recommendations to the contrary in a video I watched, place the rubber o-ring over the valve, followed by the lock ring, which has room for the o-ring to make a nice tight seal. Finger tight only! Now, just complete the tubeless tire mounting as one would, seat the beads of the tires, and then add your sealant through the valve. I was expecting to have to do this whole process again, but lo and behold, the tires have held their seal. This is what I call PROBLEM SOLVED! No more leaks through the valves and I managed to actually seat the tires with just a floor pump. I’ll update if I get any leaks or anything goes wrong, but I don’t imagine anything going wrong.Expensive, YES, but totally worth it to let me get out there on my new tubeless tires!

3. 

   Rated 5 out of 5

   William D. Skinner – February 9, 2022

   I have to admit these were a little pricier than I would have liked to have paid (not to mention that the valve core broke off inside the valve when I first aired it up… but it is possible that I was a little too forceful with the air chuck) but they add just the right amount of bling to my bike. Once I added sealant to my new Wheels with these valves there were no problems. They look great! They do exactly what they are supposed to do.

4. 

   Rated 4 out of 5

   erikherdj – May 29, 2022

   looks great and lets see how they work

5. 

   Rated 5 out of 5

   onterial – June 3, 2022

   Look no further, just buy it because you do need it and you’ve been putting it off and yes it’s worth the money!

6. 

   Rated 4 out of 5

   HI CA guy – June 9, 2022

   Very well made stems. Metal valve caps are nice.

7. 

   Rated 5 out of 5

   Life is Good ♥️???‍♀️? – June 28, 2022

   Bought this to convert my gravel bike to a tubeless set-up. It works and the color looks good. I find myself pumping my tire more frequent compared to tubed wheels. However I do appreciate the comfort of tubeless.

8. 

   Rated 5 out of 5

   kcd – August 10, 2022

   I tried fitting up my 27.5 MTB wheels using Stand tape and valves since they’re kinda the OG of the tubeless market. I could not get the stupid things to seal at all! Either tire just leaked and leaked from the valve stem – I went through 2 packs and not a single one would seal even with sealant! It would ‘seal’ after a bit, but the second I touched it to even just check my air pressure, it sprung a leak again.I was just about ready to just give up on tubeless, but I figured what the heck, I’ll try stripping the wheel down and rebuilding it with Muc Off rim tape and seals and OH MY HECKING GOODNESS!!!! The rim tape was much better than stans as well, but these valves are head and shoulders above the Stans valves!How these are better than Stans:- With these valves, you get all aluminum construction including a color matching cap as well as a ‘back plate’ of aluminum that goes behind the inner seal. This allows the clamping force of the nut to simply squish on the seal rather than trying to pull the valve out of the seal (glaring at you Stans).- Another things these have is 3 different seal shapes that you can chose from to match your specific rim shape (Stans only has a small round seal that’s not interchangeable or replaceable). I went with the rectangle(ish) one for my MTB rim.- These valves also have a small O-ring that goes in between the nut and the rim, which provides yet another sealing surface. Stans did not have this and this is where I would ALWAYS get leaks with Stans.I mounted both of my tires up (front and rear) with Muc Off rim tape and these valves and tried to inflate them. On my front, I didn’t even need my air bomb to seat the tire! I needed it on the rear (or probably could have gotten it with another layer of rim tape, but whatever – no biggie). To my surprise, once seated, BOTH wheels hold air for several minutes with no significant drop in tire pressure even without sealant! Obviously, there are some little pinholes in there that will be sealed up properly once I put in my sealant, but the Stans setup was a fight just to inflate enough to set the bead! Needless to say, Stans is junk in my experience/opinion and I will be sticking with Muc Off from now on!